-
Rotary Oven adalah oven yang terdiri dari ruang bakar/baking dan ruang pembakar/burner. Didalam ruang pembakaran terdapat control panel,burner, heat exchange, stemm box. Ruang bakar terdapat trolly yang diputar oleh unit trolly system Dengan Tray Size : 460 x 720 / 400 x 600 mm -
Specification- Model MSPR-1200x1200 :
- Heating Mode : Electric 60Kw or gas/LPG/diesel heating
- Dimension (mm) :2500 x 2200 x 1700
- Oil Tank Size (mm) : 1200 x 1200 x 450
- Model MSPR-1500x1500 :
- Heating Mode : Electric 90Kw or gas/LPG/diesel heating
- Dimension (mm) :2500 x 2300 x 1700
- Oil Tank Size (mm) : 1500 x 1500 x 450
- Model MSPR-1200x1200 :
-
- Product Weight : 5-20 g
-
Our machine can easily change the forming mould, to make different kind of product. -
FITUR PRODUK :
- Bekerja dengan krim kental dan banyak produk berbahan nabati.
- Rasa fleksibel - gunakan vanilla, coklat, rum, dll.
- Produk jadi memegang puncak selama minimal 24 jam di bawah pendinginan.
- Portabel, mandiri; TIDAK memerlukan PROPELAN GAS atau sambungan pipa.
- Tangki campuran memiliki pendinginan terus menerus, pengeluaran, nosel didinginkan.
- Mudah dibersihkan, dapat disterilkan dalam beberapa menit.
- Operasi menggunakan tombol tekan
- Hasil - hingga 5 banding 1.
-
Technical Specification :
- MSP-MHA10
- Identify Code : A10-1-7
- Weighing Range : 10-1000g
- Accuracy : X(0.5)
- Max. Speed : 65P/M
- Hopper Volume : 1.6L/2.5L
- Control Panel : 7 touch screen
- Options : Dimple Plate/Timing Hopper/Printer/Reject Device
- Driving System : Step Motor
- Power Requirement : 220V/1000W 50/60Hz/10A
- Packing Dimension (mm) : 1620(L)x1100(W) x1110(H)
- Gross Weight : 380 Kg
- MSP-MHA14
- Identify Code : A14-1-7
- Weighing Range : 10-1500g
- Accuracy : X(0.5)
- Max. Speed : 65P/M
- Hopper Volume : 1.6L/2.5L
- Control Panel : 7 touch screen
- Options : Dimple Plate/Timing Hopper/Printer/Reject Device
- Driving System : Step Motor
- Power Requirement : 220V/1200W 50/60Hz/12A
- Packing Dimension (mm) : 1750(L)x1130(W) X1200(H)
- Gross Weight : 490 Kg
- MSP-MHA10
-
Low Temperature Cooking Tank
The pre boiling tank is also called the gel forming groove, which belongs to the low temperature tank and plays the role of gel forming. The water in the water tank is heated by the steam of the steam pipe, and the temperature control system. The temperature of the pre boiling tank is set between 75 & 70 degrees. Water tank through the hot water circulating pump formation water, make the product into the water, and then began to pre cook groove end flow, a flow through the control valve to control water flow to control with flow velocity, combination is arranged in a groove of the whole conveyor chain, suitable for the production of various kinds of sinking to the network chain of aquatic products, and according to the process make meatballs reach the ideal state of shaping.High Temperature Cooking Tank
High temperature cooking tank, which will play a role in the cooking of the product. The electromagnetic valve to control the steam flow and from an automatic temper- ature control system. Usually the temperature of the cooking tank is set between 95 and 90 degree. Water tank through the hot water circulating pump formation water, make the product into the water, and then began to the groove of the end of the flow, the flow through the control valve to control water flow to control with flow velocity, binding groove is arranged in the rotary dial plate uniform will be cooked float finishing moving to transport network chain is transferred to cooling tank for cooling. In order to prevent the steam from distributing, the steam hood has the function of steam exhaust. -
Material and Parameters Wafer Vertical Cooling Cabinet
Freezer: Inlet air temperature 6-10°C (workshop temprature 22°C) Freezer relative humidity: <55% (workshop temperature 22°C) Frame: GB steel Metal plate, conveyor support: 304 stainless steel Compressor: Copeland Control panel: Microcomputer digital thermostat Heat preservation material: 150mm polyurecthane composite stainless steel plate Main coolign system: wafer cooling/air cooling system Refrigerating capacity: 10HP /20HP Electric parts: Schneider Motor: SEW Bearing: SKF Motor power: 2.85 kw Dimension: 3700 x 1200 x 2612 (mm)Material and Parameters 1000 Spiral Cooling Cabinet
Motor power: 4 kw Refrigeration power: 30HP Dimension: (LxWxH): 6000 x 4800 x 2500 (mm) -
Main technological parameter :
Model MSP-WR350 Machine speed 200-350pcs/min Power speci cation 2.0KW/220V 50/60Hz According to the actual situation Machine size (L)2050 x (W)1400 x (H)2000mm According to the actual situation -
Material and Parameters:
1. Baking frame: Grey cast iron; Baking plate: Special heat resistant cast iron; 2. Automatic spring system, stretch according to the oven and frame (optional); 3. Gas solenoid valve: imported from Japan. Baking temperature adjust range: Normal to 180°C (adjustable) Baking plate size: 470*350mm;500*350mm (optional) Sheet thickness adjustment: 2.0mm~3.2mm (adjustable) Wafer output: 50 gram~60 gram (adjustable) Oven frame: GB steel Oven sheet metal and smoke exhaust chimneys: 304 stainless steel Guiding Rail: 45# cold drawn steel Thermal insulation material: Silicon insulation board Electric epumpment: 10.4 inch colorful touch screen: Japan Motsubishi Motor: SEW Bearing: SKF Cylinder: Festo Switch: Schneider PLC: Mitsubishi Encoder: Delta Frequency converter: Danfoss Proximate switch: ROKO Power: 13 Kw -
Layout of Fully Automatic Wafer Production Line
Example: 65 plates gas wafer production line.
Equipments:
All motor and electrical parts are of international standard from famous interna- tional brand or Chinese brand. As important equipment of full-automatic wafer production line, tunnel baking machine has extraordinary outstanding performances with the main characters as follows: 1. Unanimous heat colors of water block. Scientific selection of heating compo- nents, superior material selection for baking plate and reasonable die carrier structure. 2. High rate of certified products with finished product rate of not less than 98%: uniform heating and unanimous heat colors, high biscuit demoulding rate. 3. Small cubage. As a result of reasonable layout, the body length of the baking oven is only 2/3 of the same type of product, which saves space greatly. -
Material and Parameters
Frame: GB steel Wafer Contact parts are made of 304 stainless steel Motor: SEW Encorder: Schneider Power: 0.75 Kw Cutting style: cutting wire or cutting knife (optional) Cutting speed: 15 book/min Dimension: 1545 x 2100 x 1100 (mm) -
Material and Parameters
Frame: GB steel Metal plate: 304 stainlees steel Conveyor: PU Belt (Ammeraal Beltech) Motor & reducer: SEW Cylinder: Festo Converter: Danfoss Control panel: Mitsubishi Diamension: 2485 x 1200 x 1730 (mm) Total power: 2.92 kw -
Wafer Cooling Tower
Cooling tower rovides natural aor cooling for water sheet before going to cream spreading, lower temperature prevents wafer sheets become crunchy, avoid damage in the same pace with wafer baking oven, shortens the transportation distance, extend the period of air cooling, bridge design is convenient for production workers to walkthrough.Material and Parameters
Metal plate, conveyor chain: 304 stainless steel Convey belt: Food standard PU belt (Ammeraal Beltech) Motor: SEW Power: 0.55 Kw Dimension: 2600 x 1050 x 2430 mm -
1. Tunnel Baking Oven Oven has a good metal insulation structure, beautiful appearance, equipped with batter inject system, gas heating system, gas leakage alarrm system, baking plate transmission and connection device. Burners with high energy-saving combustion technology, greatly improve the utilixation rate of combustion. Double baking room insulation structure, making the baking plates in the upper and lower heating more efficient, and furnace temperature more uniform. 1) The oven adopts double furnace chamber structure, making internal chamber heating more effective, the outside mechanical part, the batter volume, ignition control, etc. 2) Gas system components adopt products at home and abroad: whole line bearings are high temperature bearing from SKF German; motors are from SEW. 3) Baking plate adopts the grey cast iron which has long service life, utilizes the best of heat energy, making wafer sheets color even. Meanwhile it has a waste cleaning device.
-
Application Scope :
Applicable for wafer and some other cutting products with large capacity, in good order, regular shape. Solve the problem of close distance., difficult turning, not easy to arrange of traditional feeding mode, to achieve single or multiple packaging form.Main function & structure characteristics :
- Wafer automatic feeding & packing line includes separating conveyor, aligning device, material pulling mechanism, automatic distributing conveyor, stacking conveyor, automat ic packing machine. The products from cutting line, will be pulled space by the separation conveyor, then go through the auto aligning device, come into the stacking conveyor by the material pulling mechanism. The products enter orderly into packing machine by the drive of conveyor, so as to achieve continuous, orderly packaging.
- Packing speed of single line can achieve to 80-220 bags/min.
- Power supply 220V 50Hz, total power is about 26KW (five lines as drawing).
-
Main features of bagger :
- Three-servo control system with smooth and stable performance, accurate filling, and efficient capacity;
- Machine frame: 3 mm & 5 mm thickness stainless steel frame, special mechanical design to make it run faster and collaborate better;
- Servo driven film-pulling and film loading to make the film position more accurate and finished bags more beautifuland neater;
- Domestic and overseas famous brand components, and with years of market practice, ensure machine performance more stable and durable;
- Machine design conforms to GMP standard, with CE certifications.
Application :
Suitable for the packaging of granular products, to realize automatic packaging. -
Main features of bagger :
- Three-servo control system with smooth and stable performance, accurate filling and efficient capacity;
- Machine frame: 3mm & 5mm thickness stainless steel frame, special mechanical design to make it run faster and collaborate better;
- Servo driven film-pulling and film-loading to make the film position more accurate and finished bags more beautifuland neater;
- Domestic and overseas famous brand components, and with years of market practice, ensure machine performance more stable and durable
- 5. Machine design conforms to GMP standard, with CE certification.
Main features of weigher :
- Expert brand manufacturer, with stable performance and efficient capacity;
- Intelligent operation and control system, simple and easy operation;
- World brand electric components and Load cell, accurate weighing with long service life.
Application :
Suitable for the packaging of granular, stick shape products. -
Main features of bagger :
- Three-servo control system with smooth and stable performances, accurate filling, and efficient capacity;
- Machine frame: 3mm & 5mm thickness stainless stell frame, special mechanical, design to make it run faster and collaborate better;
- Servo driven film-pulling and film loading to make the film position more accurate and finished bags more beautifuland neater;
- Domestic and overseas famous brand components, and with years of market practice, ensure machine performance more stable and durable;
- Machine design conforms to GMP standard, with CE certification.
Main features of Piston Pump :
- Machine frame in stainless steel #304, suitable for pharmacy and food products production, simple operation and easy cleaning;
- The seal structure and material of the pump body are specially optimized and designed to work stably for along time without leakage;
- World brand pneumatic components drive controller, fast and stableperformance, high production speed.
Application :
Suitable for the packaging of liquid products,to realize automatic packaging. -
Main features of bagger :
- Three-servo control system with smooth and stable performances, accurate filling, and efficient capacity;
- Machine frame: 3mm & 5mm thickness stainless stell frame, special mechanical, design to make it run faster and collaborate better;
- Servo driven film-pulling and film loading to make the film position more accurate and finished bags more beautifuland neater;
- Domestic and overseas famous brand components, and with years of market practice, ensure machine performance more stable and durable;
- Machine design conforms to GMP standard, with CE certification.
Main features of auger filler :
- Machine frame in stainless steel #304, suitable for pharmacy and food products production, simple operation and easy cleaning;
- CNC machine processing, high accurate screws design, ensure best precision filling;
- Servo motor-controlled system, performance more stable and filling speed faster.
Application :
Suitable for the packaging of powdered products, to realize automatic packaging. -
VFFS Liquid / Paste Packing Machine
Technical parametersModel MSP-VL350 Process weighing No Packaging speed 5-20ppm Specifications 1000-15000g Width of bag 150-350mm Length of bag 200-800mm Printer Optional Mark sensor Optional Voltage/Power 3x380V + N/2kW Compressed air 0.6 Mpa/0.3M³/Min Weight of the machine host 613Kg Machine size W 1110 x L 1550 x H 2065mm -
Descriptions :
- Fully automatically complete all the process from feeding, weighing, filling, packaging, sealing date printing and counting.
- Use the SIEMENS/DELTA PLC control system and touch screen, the operation is more stable & easy adjustment.
- Work enviroment quiet, low noise, saving energy.
- English and client native language touch screen display, intuitive and simple operation.
- Servo film transporting system and color sensor, positioning accuracy, high performance, packaging beautiful.
- Multiple automatic alarm protection, reducing the maximum loss.
- It can stock ten dispose, simple to change variety.
- Film-pulling with servo motor double belt; less pulling resistence, bag is formed in good shape with better appearance, belt is resistent to be wom-out.
-
The Main Technological Parameter :
Model MSP-VJR500 Number of axis 2 axis Maximum working radius 500-1000mm Repeated positioning accuracy + 0.01mm Rated speed 5-25 times/min Payload 0.1 Kg-10 Kg Allowable intertia moment 0.12 Kg m2/0.01 Kg m2 Adaptive enviroment 0°C - 40°C Installation mode Ground Power 6.0 Kw Power supply voltage DC24V:6A AC200-240V:10A Body/weight 500 Kg -
Vertical Filling Machine merupakan mesin filling untuk selai buah, isian pastry misalnya pastry kacang merah, butter. -
- Product Weight : 10 -180 g
-
Product Introduction ● This machine are all made of stainless steel (exclusive of the standard parts), the working principle: by the rotation of the auger the slurry hopper down (roller die) feeding, forming roller embedded four fine production of automatic demoulding mould (mould for each of two molded product design), that means forming roller rotates a circle, you can forming eight products, production has been the effective promotion, working better with the combination of a pumping machine, Reasonable design, convenient cleaning, and food contact parts are in line with national health standards. ● This product is at present and in the future on the market relatively popular, particulary suitable for producing products used for deep frying, steaming, or ready to eat products, product shape, size can customized according to user needs. -
What are the salient features of single-head encrusting & co-extruding machine?
● A great choice for small scale production. ● A unique machine designed to make a wide range of products producible. ● Designed with 3 hoppers too enable. Producing center-filled products. -
Keunggulan Vacuum Fryer Generasi Keempat
Mesin Vacuum Fryer generasi keempat telah menumbangkan konsep jam kerja yang panjang dan efisiensi kerja yang rendah pada vacuum Fryer tradisional. Perusahaan kami telah menggunakan banyak feedback dari pelanggan dan memproses berbagai pengalaman produk dan memperoleh pengalaman lanjutan dalam peralatan asing, meningkatkan peralatan, dan menyuntikkan teknologi pada alat kami. Vacuum Fryer ini memiliki peningkatan efisiensi kerja sebesar 30%. Pencapaian pada setiap suku cadang dan komponen peralatan kami, memudahkan pelanggan untuk mendapatkan layanan penjualan yang nyaman dan cepat. -
Speed 6-18 bag/min Bag Type 3 slide seal bag, stand up bag Bag Size 100 ≤ width ≤ 300mm 100 ≤ Height ≤ 420mm Machine Dimension L:1635x W:510xH:1650mm Power 220V/50Hz/60Hz, Single Phase 20A Technical Feature SS304 Machine Frame & Contact Parts Handle Range Granule, Powder, Liquid, Coffee Bean, Candy, Pet food etc, Food & Non-Food -
Speed 6-15 bag/min Bag Type 3 slide seal bag, stand up bag Bag Size 250 ≤ width ≤ 500mm 350 ≤ Height ≤ 600mm Machine Dimension L:1680x W:1140xH:1540mm Power 220V/50Hz/60Hz, Single Phase 20A Technical Feature SS304 Machine Frame & Contact Parts Suitable for various sizes of packaging bags, no bags no material, CE certi‑cation, easy operation and maintenance, low cost. Handle Range Granule, Powder, Liquid, Coffee Bean, Candy, Pet food etc, Food & Non-Food -
FITUR PRODUK :
- Panel sentuh dengan fungsi pengaturan memori.
- Menggunakan Pemotong ultrasonik dengan getaran kecepatan tinggi untuk memindahkan barang dan membuat permukaan kue terpotong halus dan rapi.
- Pisau dapat dibersihkan secara otomatis.
- Dua Jenis, Single dan Putaran Ganda.
- Dapat diintegrasikan ke dalam jalur produksi yang ada dan dapat digunakan secara mandiri.
-
FITUR PRODUK :
- Maximin mendekati teknologi tradisional.
- Mewujudkan sistem untuk roti berasa lebih enak.
- Segmentasi presisi tinggi dan berat stabil.
- Floor Area (L x W) : 12meter(L)*1.8meter(W)
- Table Height : 1100mm
- Capacity Per Hour : 5000-30000 pcs (4heads-6heads)
- Realising Tower : 15 - 20 mins
- Bread Weight Range : 50g - 150g
-
FITUR PRODUK :
- Segmentasi presisi tinggi dan berat meja.
- Lebih mendekati kerajinan tradisional.
- Mudah dirawat dan dibersihkan.
- Floor Area (L x W) : 6.5meter(L)*4meter(W)*3.2meter(H)
- Capacity Per Hour : 3500-6000 pcs (4heads-6heads)
- Product Tower : 30g-350g
- Realising Tower : According with customer's requirement
- Net Dough Sheet Width : 600mm - 1400mm
-
Feature :
- PLC and HMI controller, servo motor film driving system, easy to operate and maintain.
- Advanced potpcell tracking system to ensure the cutting position accuracy.
- Separate circuit boxes for power control and peneumatic control, low noise, goodtighness and much more stable for machine woring.
- The machine can be equipped with dosing system (multihead weigher, auger filler, etc) and convey system according to the product’s property, finish the procedure of measuring filling, bagging, gas flushing (exhausting), sealing, cutting and counting automatically.
- Have error indicating system, helping handle the trouble immediately
-
Feature :
- PLC and HMI controller, servo motor film driving system, easy to operate and maintain.
- Advanced potpcell tracking system to ensure the cutting position accuracy.
- Separate circuit boxes for power control and peneumatic control, low noise, goodtighness and much more stable for machine woring.
- The machine can be equipped with dosing system (multihead weigher, auger filler, etc) and convey system according to the product’s property, finish the procedure of measuring filling, bagging, gas flushing (exhausting), sealing, cutting and counting automatically.
- Have error indicating system, helping handle the trouble immediately
-
Main function & structure characteristics :
- Two-channel automatic feeding & packing line consists of separating conveyor, distributing conveyor, turning & collecting unit, stacking conveyor, two-channel storage conveyor, two-channel automatic feeding unit, two-channel stacking conveyor and automatic packing machine. The process is frist open products distance, divide into columns, then automatic distribute, finally feed the products into multiple channels (two-channels) automatic feeding unit and packing machine. The advantage is continuour production, high efficiency and beautiful packaging.
- Automatic tune-over device is optional. Separating conveyor can be designed according to the actual situation.
- Maximum packing speed of single line can reach 280 bags/min. The actual speed depends on product dimension, packaging type and the material of packaging film.
- Power supply adopts 220V 50Hz, total power is about 31KW as the drawing (4 lines).
-
Main specications
Bag size (L) 80-300mm (W) 80-200mm Film width Max. 420mm Film thickness 0.04-0.10mm Packing speed 80-160 bags/min Air Consumption 0.6Mpa, 0.6m³/min Power Supply 220V/380V 50-60Hz Power 6 KW Dimension L 2000 x W 1320 x H 1750mm Weight 80 Kg -
FITUR :
- Oven terowongan tersedia dengan tipe gas atau listrik.
- Oven terowongan memiliki pemanas atas bawah, dapat memanggang jenis makanan, seperti kue, roti, kue bulan, hamburger, roti panggang, kue kering, biskuit, dll.
- Memanggang terus menerus, kapasitas memanggang besar, pengoperasian mudah dan menghemat tenaga kerja.
- Komponen pemanas yang diimpor dari jepang, ternyata dapat membuat pemanggangan yang optimal.
- Suku cadang listrik yang diimpor, lebih tahan lama dan aman.
- Mengadopsi wol batu isolasi berkualitas tinggi, perlindungan panas yang sempurna.
- Tingkat panas memanggang dapat kontrol terbagi. Anda dapat menyesuaikan setiap bagian pemanas sesuai dengan produk yang berbeda.
- Permukaan baja tahan karat berkekuatan tinggi, terlihat sangat indah.
- Lebar dan panjang produk dapat disesuaikan sesuai permintaan.
-
Main Technical Parameters :
Heat treatment charateristics - The temperature is high, the recovery rate of heat energy can reach 90%.
- Corrugated heat exchange tube material temperature change is small,mild heating, High heat exchange efficiency, less scaling, continuous sterilization for a long time.
Fully automatic control - The whole process of automatic control and recording equipment CIP cleaning, equipment pipeline sterilization and raw material sterilization.
- Sterilization temperature control is accurate and reliable. Automatic monitoring of the entire sterilization temperature of the system and steam pressure, flow,material flow and other process control points.
Production Process Material contact with the material wall polishing, automatic welding interface Equipment cleaning method Automatic cleaning equipment, automatic sterilization, to ensure system sterility Electrical accessories The main control components: material pumps, hot water pumps, various types of valves, control systems etc. Brand: international brands Use security System Accessories Performance Reliability. In equipment design, pay attention to the user's personal safety, in the steam, hot water, materials and other key areas with pressure protection device and alarm system. Custom Pipe pasteurizing machine and yogurt sterilization machine can be designed and manufactured according to user requirements. -
KW-T series tube ice machine adopts split-type design, the maker and storage part are in two parts, the size of ice machine are smaller and convenient to install. The ice is thick and transparent, widely used in different occasions: drinking, fresh maintenance, aquatic food processing, ice plat and gas station, etc. It’s very preferable by people. Tube ice is a type of ice like hollow cylinder. We have four dimensions of external diameter, which includes: water purifier, tube ice machine, semi-automatic or full-automatic packing equipment, and cold room. -
Triple Filling Machine merupakan mesin yang dapat digunakan untuk pengisian produk dengan tiga filling, dapat menyesuaikan pengisian, dengan keuntungan besar. -
Specification- Working Capacity : 40-50 BPM
- Measuring Method : Sliding volumetric type
- Sealing Type : High frequency sealing
- Shape of Packing : Pyramid or square type
- Mesh of Packing : Standard mesh for high frequency sealing
- Width of Mesh : 120mm, 140mm (160mm, 180mm can be customized)
- Volume per pack : 2 ± 0.5g/bag (other volume can be customized)
- External diameter of mesh roll : ≤ 350mm
- Inside diamter of mesh roll : 76mm
- Power Supply : Per client’s specifications, 0.5Kw
- Air Supply : ≥ 0.6 Mpa
- Operator : 1 Operator
- Machine Dimension : L 880mm x W 640mm x H2200mm
- Machine Weight : 350Kg
-
Cookies Forming dengan tray dan Cake Forming yaitu jenis cookies machine dengan teknik wire cut -
Tray Feeder
The empty or with gummy candies and starch trays will be conveyed from the stacker to the track of tray feeder. The frame propulsion mechanism send the trays to the tray pallet liher. The tray stacker (5 pcs trays per stack) will be lihed to the tray feeder automatically and transited to the discharge area, the stack is first de-stacking in to groups of 5 trays which area then separated into single trays. The de-stacking conveyor moves continuously to the first turning section.Tray Feeder
The trays are conveyed to the bottom of stacker section. Stacker mecha- nism stack the one trays on by one till to be 5 pcs per stack. Tray stackers will be lihed to loading frames, then to the output conveyors. Then to the drying room automatically or manually. Empty loading frames will be sent to the tray stacker section.Buck
The trays be turned 180 degree for discharging (demould) the products and starch into vibration sieve, then turned another 180 degree up and pushed forward from the turn table. The products and starch will be separated when getting to the vibration sieve. The products will be cleaned its remaining starch by compressed air firstly and sent to the conveyor. Separated starch will be collected into hoppers and sent to starch tank or starch conditioning system (be recycled after drying and cooling) by vertical spiral. A starch hopper positioned over the tray conveyor dispenses starch into the tray. The amount of starch is regulated by the variable speed rotary paddle in the hopper. The starch surface is smoothed by the reciprocating horizontal leveler immediately after filling. It is by the complete mold board which permits pressed to be transmitted to the mold for accurate printing. A controllable pneumatic knocking mechanism is provided to free the mold celanly and break the vacuum before the mold is lihed. After printing, printed trays will be sent to the conveyor to depositing section, and stop below the nozzles accurately.*Design and specifications may change without notice. -
Karena struktur baki yang menurun dari piring, paling banyak 7-10 baki panggangan ditempatkan pada satu waktu, yang mengakibatkan pemborosan buatan dalam menempatkan baki. Manipulator mengambil baki dan mengadopsi sistem pengangkat otomatis troli baki untuk memasok baki. Pasokan 7 nampan kue setiap kali meningkat menjadi lebih dari 100, yang sangat mengurangi tenaga kerja manusia -
KEUNGGULAN KINERJA :
Untuk produk dengan bagian bawah sempit dan kepala tinggi, atau produk kecil dan bulat, karena kelembaman alami saat melempar kue, mudah menyebabkan produk terbalik. Lengan mekanis diadopsi untuk meniru tindakan manual, dan dapat ditangani dengan ringan, seperti baozi, roti kukus, dll. -
Menurut keragaman produk di pasar dan kebutuhan pelanggan yang berbeda, piring kami dibagi menjadi 5 gaya, yaitu:- Piring industri
- Mesin penjepit dan platting
- Manipulator memegang mesin piringan cakram
- Piring konvensional
- Jalur pengangkutan baki industri
-
- Production Speed : 80 - 160 pcs/min
- Production weight : 10 -600g
-
Max Prod. Cap: 6.000 pcs/hr Tray Max Size: 40×60 / 46×72 (cm) Dimension: 1.690x490x1.050 (mm) Electrical Power: 1.200 watt Electrical Voltage: 220 v/50 hz
